Contribute
Register

What OSX may I use with 2 X5670 Westmere-EP CPUS?

Status
Not open for further replies.
Thanks.

Well I fixed the system memory issue. with Clover. MY system has the correct slots and memory.. 24GB. all fixed by adding the entry's in SMBIOS.

Still not luck with
Ethernet (INTEL) 82576 Gigabit dual port
PCI\VEN_8086&DEV_10C9&SUBSYS_10C915D9&REV_01

I have ordered an USB 3 card for MAC and a USB 3 WIFI Dual BAND for MAC too.

Need sound card advice.
 
norcimo said:
Thanks.

Well I fixed the system memory issue. with Clover. MY system has the correct slots and memory.. 24GB. all fixed by adding the entry's in SMBIOS.

Still not luck with
Ethernet (INTEL) 82576 Gigabit dual port
PCI\VEN_8086&DEV_10C9&SUBSYS_10C915D9&REV_01

I have ordered an USB 3 card for MAC and a USB 3 WIFI Dual BAND for MAC too.

Need sound card advice.
Click to expand...
Did you try AppleIGB.kext? It is supposed to work with that NIC.
Remember to repair permissions, rebuild the caches and reboot after installation before trying the network to see if it works.
 
Going Bald said:
Did you try AppleIGB.kext? It is supposed to work with that NIC.
Remember to repair permissions, rebuild the caches and reboot after installation before trying the network to see if it works.
Click to expand...

I tried that. Got nothing. no panic, nothing, like it never install.
Maybe it wont with Capitan, I did not see any mention that it will.

Can you recommend to where it should be installed? what program to use ?
 
norcimo said:
I tried that. Got nothing. no panic, nothing, like it never install.
Maybe it wont with Capitan, I did not see any mention that it will.

Can you recommend to where it should be installed? what program to use ?
Click to expand...
Copy the kext to your desktop, download and run KextBeast from the site downloads and run it. You can select to put the kext in S/L/E or L/E. I would suggest L/E.
Then run DPCIManager app and repair permissions/rebuild caches.
 
Going Bald said:
Copy the kext to your desktop, download and run KextBeast from the site downloads and run it. You can select to put the kext in S/L/E or L/E. I would suggest L/E.
Then run DPCIManager app and repair permissions/rebuild caches.
Click to expand...

I did kext beast.
hum...let me try it again.. and run the DPCI Manager ....

Thanks
 
norcimo said:
I did kext beast.
hum...let me try it again.. and run the DPCI Manager ....

Thanks
Click to expand...

ok.. It found the two network ethernet. but they are not working. it says cable unplugged.
 
Ok Fixed the Ethernet issue with the
Ethernet (INTEL) 82576 Gigabit dual port
PCI\VEN_8086&DEV_10C9&SUBSYS_10C915D9&REV_01

thanks You REHABMAN. for FakePCID. All modded to with VEN and PCI id of the 82576 Eth.gigabit card. Just Install.
Testing and working on 10.11. ( i made this post with the actual machine) SuperMicro X8DT3

FakePCIID.kext
FakePCIID_INTEL_GBx.kext
SmallTreeIntel82576.kext
 

Attachments

  • Intel_82576_ETH.zip
    85.8 KB · Views: 107
Last edited:
:clap::thumbup:
 
Going Bald said:
:clap::thumbup:
Click to expand...

Thank you. Once I get the Sound card..I will post the build and details. Just got USB 3.0. Inatek KT4006. Works OOTB. and works in Windows 10 too. hence I do dual boots.
 
norcimo said:
Thank you. Once I get the Sound card..I will post the build and details. Just got USB 3.0. Inatek KT4006. Works OOTB. and works in Windows 10 too. hence I do dual boots.
Click to expand...
How about making a User Build thread in http://www.tonymacx86.com/forums/user-builds.28/
Describe your system and add pics, list what problems / fixes you encountered in getting an operational system. There are many who would like to build a dual CPU workstation and there are not enough dual socket boards/CPUs represented in the User Builds to encourage new builders.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top