- Joined
- Jun 17, 2016
- Messages
- 6
I think I am having a problem because I'm using the HDMI connector from my motherboard since I don't have a video card or any other type of monitor (current iMac user).
I am using a Gigabyte GA-Z170M-D3H Micro ATX LGA1151 Motherboard with an Intel Core i5-6600K 3.6Ghz Quad Core Processor.
Starts to work fine then I get a kernel panic and it reboots. Attached is a screenshot.
The only things I changed on my Bios were to Load Optimized Defaults and set XHCI handoff to enabled. Secure boot mode and Other OS were already selected.
Seems to be something like this, from the big list of solutions. But I'm not exactly sure what to do now. I did confirm that it is set for Inject Intel[+]
Haswell Integrated Graphics Don't Start
I am using a Gigabyte GA-Z170M-D3H Micro ATX LGA1151 Motherboard with an Intel Core i5-6600K 3.6Ghz Quad Core Processor.
Starts to work fine then I get a kernel panic and it reboots. Attached is a screenshot.
The only things I changed on my Bios were to Load Optimized Defaults and set XHCI handoff to enabled. Secure boot mode and Other OS were already selected.
Seems to be something like this, from the big list of solutions. But I'm not exactly sure what to do now. I did confirm that it is set for Inject Intel[+]
Haswell Integrated Graphics Don't Start
- Often a hang or reboot after hfs: set VeryLowDisk: vol:untitled
- Often several lines after Missing Bluetooth Controller Transport
- Format your disk Mac OS Extended (Journaled) with GUID Partition Table before running the installation process
- Try Clover Configurator / ACPI / FixDisplay
- Confirm Inject Intel = true
- Try updating to current BIOS release
- Try using other digital outputs on your board (other HDMI/DVI/DP ports)