GA-Z170-HD3 Audio Devices not detected/Audio not working

I am building a hackintosh for a local radio station and unfortunately I am having trouble getting the audio to work. None of the audio jacks work, and no devices show up. I tried to install ALC887/ALC888 using multibeast however this did not lead to the audio working (the machine was reset before the test). I also tried to install the optional 5.1 install because my manual indicates that they may run that channel, once again after reset, did not work.

It is a GA-Z170-HD3 Gigabyte ultra durable board with an i3 processor and 16 gb of ram. No graphics card. It is quite similar to the thread made by Danjerous (link http://www.tonymacx86.com/threads/help-my-hackintosh-wont-detect-audio.194664/) I have yet to try the options in this thread because in his case he is using the MX version of the board and didn't want to screw up my installation so far. I have seen that I may need to post a log here, but I am unsure how to get it. Any advice would be appreciated.

Okay, so I have been able to get the headphone jack working. I figured out my setup is Skylake and so I followed the guides here. However, I am having trouble using audio_CloverALC to get the back panel working for a better output. As I said, its for a radio station, so clarity is key. I have attached my config.plist here. The problem I get is I have the following:

Agreement

The audio_cloverALC-110 script is for personal use only. Do not distribute

the patch, any or all of the files or the resulting patched AppleHDA.kext

for any reason without permission. The audio_cloverALC-110 script is

provided as is and without any kind of warranty.


File: audio_cloverALC-110.command_v1.0r10

Release Mode

EFI partition is mounted

System Integrity Protection status: enabled (Custom Configuration).


Configuration:

Apple Internal: disabled

Kext Signing: disabled

Filesystem Protections: disabled

Debugging Restrictions: enabled

DTrace Restrictions: enabled

NVRAM Protections: enabled


This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.


OK to patch

Confirm Realtek ALC887 (y/n): y

ALC887 v_0x100302 (Current)

Clover Audio ID Injection (y/n): n


Download ALC887 files ...

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

100 24502 100 24502 0 0 97917 0 --:--:-- --:--:-- --:--:-- 97617

Edit config.plist/Devices/Audio/Inject/1

Edit config.plist/SystemParameters/InjectKexts/YES

Download kext patches

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

100 1418 100 1418 0 0 6689 0 --:--:-- --:--:-- --:--:-- 6720

Print: Entry, ":KernelAndKextPatches:KextsToPatch:5 dict", Does Not Exist

Print: Entry, ":KernelAndKextPatches:KextsToPatch:6 dict", Does Not Exist

Print: Entry, ":KernelAndKextPatches:KextsToPatch:7 dict", Does Not Exist

Print: Entry, ":KernelAndKextPatches:KextsToPatch:8 dict", Does Not Exist

Print: Entry, ":KernelAndKextPatches:KextsToPatch:9 dict", Does Not Exist

SyaoranFox said:

having trouble using audio_CloverALC

Click to expand...

See II. Problem Reporting, Post #1, No Audio Devices - Realtek ALC AppleHDA. Post to thread linked.