Contribute
Register

OS X 10.10.5 Update

Status
Not open for further replies.

tonymacx86

Administrator
Staff member
Joined
Nov 17, 2009
Messages
7,368
Motherboard
Z370N WIFI
CPU
i7 8700K
Graphics
HD 630
Mac
  1. MacBook Air
Classic Mac
  1. Apple
  2. PowerBook
Mobile Phone
  1. iOS
su.jpg
Today Apple released 10.10.5, the fifth (and final?) major update to OS X Yosemite. Update any supported system using the built-in Software Update functionality through the Mac App Store, or by using the standalone installer available from Apple.com.


Be sure to back up any important data, and if possible clone your hard drive before applying the update. If you have any issues post-update, boot using UniBeast created USB and type -f to boot without caches or -x to enter safe mode.
Screen Shot 2015-08-13 at 1.36.41 PM.png
What we know about 10.10.5 so far...

  • OS X Build 14F27
  • Kernel updated to 14.5.0 Darwin kernel
  • Updated Intel, NVIDIA, and AMD graphics drivers
  • This update will replace your audio drivers.
    • If using Chimera/MultiBeast you will have to reinstall AppleHDA using MultiBeast before or after reboot
    • If you use Clover or VoodooHDA, you may not need to make any modifications
  • X99 kernel and chipset support still absent - Haswell-E and X99 temporary guide remains necessary.
  • Install OS X Yosemite App Updated - If you downloaded Yosemite from the App Store prior to today, and you want to have the latest version on your backup installer USB, simply log into the Mac App Store and click Download. When the download finishes, the app will automatically open. The updated 10.10.5 Install OS X Yosemite App can be found in the Applications folder. You may then re-create your UniBeast installation USB.
  • Security update: Includes a fix for the DYLD_PRINT_TO_FILE privilege escalation vulnerability that could allow malware to gain root access to a Mac.

Testing is now underway- this post will be updated. Good luck, and let us know how it goes! Report your results here.

Related Posts:
OS X 10.10.4 Update
OS X 10.10.3 Update
OS X 10.10.2 Update
OS X 10.10.1 Update

OS X Yosemite is Now Available on the Mac App Store

OS X 10.9.5 Update

OS X 10.9.4 Update

OS X 10.9.3 Update
OS X 10.9.2 Update
OS X 10.9.1 Update
OS X Mavericks is Now Available on the Mac App Store
 
Notes:
- This may break some of your Yosemite functions, like audio, TRIM and the nVidia Web drivers. So, being an Early Adopter is fraught with problems. Make sure you backup first. :thumbup:

- If you're using nVidia drivers for your GeForce GTX 750, 750Ti, 960, 970, 980, 980 Ti and the Titans 'Maxwell' graphics cards, you'll need to install the nVidia 10.10.5 Web driver(s) after the 10.10.5 update. You are advised to wait for nVidia's update or use the nVidia Yosemite Beta Web drivers. tonymacx86 will publish the link to the nVidia Web Driver as soon as it's announced. See threads in the http://www.tonymacx86.com/graphics/ or here if you have one of these Maxwell graphics cards, such as: GTX 750, 750Ti, 960, 970, 980, 980 Ti or Titan graphics cards.


Here's the step by step way to update for those who aren't using the nVidia Maxwell graphics cards :
:ch: Repair Permissions using the Disk Utility on the drive to be updated;[SUP]1[/SUP]
:ch: Backup your current installation using Carbon Copy Cloner or SuperDuper;
:ch: Download the latest MultiBeast for Yosemite;
:ch: Download the Software Update or the Combo Update and run it to update to 10.10.5;
:ch: Re-boot;
:ch: Run MultiBeast for Yosemite and just select your audio driver to install
:ch: (Optional) Check to see if your TRIM setting has survived through the update - if not, use the "trimforce" Terminal command[SUP]2[/SUP]; if you've used the "trimforce" command in 10.10.4, then it should "survive" the update, but check to make sure;
:ch: Re-boot; and
:ch: Repair Permissions again.[SUP]1[/SUP]​

Tip: Don't use the iMac15,1 and Mac Pro 4,1/5.1/6.1 System Definitions. These SysDefs have been found to cause problems. For Haswell builds, toleda recommends iMac 14,1 for HD4600 and iMac14,2 for graphics cards; MacPro6,1 is only appropriate for X99 systems.


Please post help requests in the Yosemite Desktop Support Forum section (not in this thread).


[SUP]1[/SUP] You can use the Terminal instead of Disk Utility if you feel comfortable with a UNIX command:
Code:
 sudo diskutil repairPermissions /

[SUP]2[/SUP]Use the new Terminal trimforce command in the following manner:
Code:
sudo trimforce enable
 
:ch: (Optional) Check to see if your TRIM setting has survived through the update - if not, use the "trimforce" Terminal command**; if you've used the "trimforce" command in 10.10.4, then it should "survive" the update, but check to make sure;

TRIM enabled using the native command 'survived' the update for me using Software Update. :thumbup:

Screen Shot 2015-08-13 at 2.03.37 PM.png
 
Update works fine. Just the regular stuff.
 
Update went fine no problems System: Z77-DS3H Core i7 3770 GTX760. :thumbup:
 

Attachments

  • Screen Shot 2015-08-13 at 19.38.29.png
    Screen Shot 2015-08-13 at 19.38.29.png
    76.2 KB · Views: 2,114
  • Screen Shot 2015-08-13 at 19.38.44.png
    Screen Shot 2015-08-13 at 19.38.44.png
    207.2 KB · Views: 2,310
This update:
Improves compatibility with certain email servers when using Mail
Fixes an issue in Photos that prevented importing videos from GoPro cameras
Fixes an issue in QuickTime Player that prevented playback of Windows Media files

my question?

If they also Updated Intel, NVIDIA, and AMD graphics drivers, why is this not mentioned on apples WebSite, and what are the changes made to this Drivers?

thanks
 
This update:
Improves compatibility with certain email servers when using Mail
Fixes an issue in Photos that prevented importing videos from GoPro cameras
Fixes an issue in QuickTime Player that prevented playback of Windows Media files

my question?

If they also Updated Intel, NVIDIA, and AMD graphics drivers, why is this not mentioned on apples WebSite, and what are the changes made to this Drivers?

thanks

My Nvidia GTX660 working on 10.10.5 without drivers update
 
Status
Not open for further replies.
Back
Top