Hack Won't Boot After Updating To 10.8.3!

Okay, so I just updated to 10.8.3, and now when I boot, the Apple logo comes up, and then the screen goes dark for a second, and turns white until I turn off the computer. When I boot into -v the last thing I see is swapon SUCCESS, and when I boot with -x, I get into the system, do I have to update my multibeast settings? I'm really scared and I have no idea what to do! I've tried everything; booting without the GPU, safe mode, but NOTHING seems to work! If you have any suggestions, I would be very open to them! Thanks

Here are my specs:

CPU: Intel Core i7-3770K
MB: Gigabyte GA-Z77X-UD5H
GPU: ATI Radeon 7950
Boot Drive: Samsung 840 PRO 128GB SSD (note that I don't have trim enabled in multibeast)
PSU: Corsair TX850M

I'm having the same problem... any solution ?

I'm having the same issue right now as described in my thread on page 1 or 2. My problem with integrated graphics is I have the EVGA Z77 FTW board that only has mini DP. And I only have a miniDP-HDMI adapter that is confirmed to work but I'm not getting a video signal out of my board through it. So I have no integrated graphics right now.

I solved my problem by using my SATA to usb cable linked to my macbook and ran mulitbeast with both 32 and 64 bit graphics enabler=no. Hope that helps, it did for me.

same problem here :\ however I cannot boot not even in safe mode

I found a solution! Download this: http://www.osx86.net/view/3766-ati_hd_7xxx_fix_white_screen.html

and put it in your startup options, but a disadvantage, you will have to start up to your desktop, bypassing the password

Just did the update, now I can only boot in safe mode.





Help!

Edit: Tried to update Cuda driver in safe mode and it gets all the way through and then says "Installation Failed".

Edit: Great now I changed the profile in Multibeast and I can't boot at all. THIS SUCKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Edit: Kernel panic with this error:
panic(cpu 0 caller 0xffffff80000659301): "Unable to find driver for this platformL \"ACPI\".\n"@/SourceCache/xnu/xnu-2050.22.13/iokit/Kernel/IOPlatformExpert.cpp:1548

This is where I am currently stuck. Please help me get my system back up and running. Time Machine restore failed.

Edit: Did a fresh install on a new partition and now I can't get that to work. Man this really sucks! L!

Restored from an older CCC image and am back up and running. I saved the hosed partition off to an image just for GP. I then created another 10.8.2. partition from my working copy and I can't seem to get the 10.8.3 upgrade going on it. It seems to choke on the VoodooHDA load on boot up but I removed all traces of VoodooHDA and still it chokes on that. Doesn't even boot to safe mode. Oh well, at least I have my old working system back up and running. I disabled the update notifications from the app store so I wouldn't have to think about it anymore. :/