Tab Content
About Me
About StudioK

Basic Information

About StudioK
Mobo:
GA Z97M-D3H
CPU:
Intel Core i3-4370
Graphics:
Zotac GTX 750
Mac:
iMac
Classic Mac:
SE

Build Signature

Recent Posts


 | 
January 14th, 2016 01:39 PM
Thank you Stork for the clarification. I've tested a 20" ACD with my Z97 machine (plugging dVI into GTX 750). The Post screen appeared in normal res as did the OS. But I'm intending to run a 27" ACD with mini display port connected to a Z68 system. So I guess I need to plug an ACD into the Z68 to see if I can use the BIOS in normal...
6
 | 
January 12th, 2016 04:24 PM
jbamford, What is the model of active adaptor that you are using to connect your cinema display? And what Cinema Display are you using? DVI or mini display port edition?
23
 | 
January 11th, 2016 08:41 PM
I can run my 20 inch Cinema Display on my hackintosh with Clover without the resolution problem at boot. The ACD is connected directly to the DVI socket on my GTX 750 card. So I am wondering if the Radeon cards (used in conjunction with Clover) are the source of the problem. I've found three people with this boot/resolution problem so far,...
23
 | 
January 11th, 2016 03:13 PM
Now I've seen a current thread reporting resolution problems using a Cinema Display with Clover as the bootloader. In this case, it's an older ACD with the DVI connector. So the Displayport connection must not be the issue. What both of these threads have in common is Radeon cards. Is anyone successfully using a Cinema display plugged into...
6
 | 
January 11th, 2016 02:32 PM
Thank you for your reply. I've just read a post written by someone last summer using the HD 6870 to drive a 24 inch ACD with mini displayport. The poster complained that the resolution was messed up on the ACD after switching to Clover. Some sort of trick was required like putting the computer to sleep at the login screen, then waking it...
6
 | 
January 11th, 2016 01:06 PM
Seeking quick advice before I start buying things: I would like to run 27 inch Apple Cinema Display LED (mini displayport version) on my hackintosh without using an adapter cable if possible. Would a GPU like the HD 6870 be able to run this ACD with its built-in mini displayport? Also, I've seen old posts claiming this card 'just works'...
6
 | 
October 15th, 2015 11:05 PM
MR. Bald, I would like to dual boot OS X El Capitan and Ubuntu Linux using Clover UEFI method. And I would prefer to have Linux on the same drive as OS X. I've got OS X going at the moment, but am uncertain how to deal with the Linux/Grub install. I had both on the same SSD booting with Chimera, but Clover and UEFI are new things for me. ...
68
Page 1 of 3123

Most Recent Recommended Threads