Tab Content
About Me
About shokka9

Basic Information

About shokka9
System:
Asus Maximus V Gene
CPU:
Intel 3770K
Graphics:
Gigabyte GeForce GTX780
Other Hardware:
OCZ Vertex 3 SSD 120GB x2
WD Caviar Green 2TB x2
Mac:
MacBook Pro, Mac Pro
Mobile Phone:
iOS

Build Signature

Recent Posts


 | 
March 8th, 2015 02:00 PM
No, I had the screen first. Tried that, then ordered the cable. I have the cable now, but have not installed it yet. I put the original screen back in, in order to use the laptop. I am actually going to install the cable now. Let's see what happens. :-) EDIT - After disassembling the whole laptop, switching out the cables. I have the...
84
 | 
March 6th, 2015 10:22 AM
I have the cable, but have not installed it. No problems doing that, when I get around to actually doing it. I am on Clover, and I might just do a fresh install, and restore my Time Machine. It's only a 60GB partition, with about 30GB free. There is nothing on it. As long as the laptop boots, and I can see the bios, I know the cable/screen...
84
 | 
February 28th, 2015 09:15 AM
Well.... I'm in the same position. I bought the 1920x1080 screen. I have just powered up the laptop, and the screen lights up, but nothing visible. I guess I need that cable? I'm gonna order it today, and maybe everything should work? If not, I will be selling it all on eBay.
84
 | 
February 25th, 2015 07:40 AM
Thanks @nguyenmac. I did not think there would be any issues, I just wanted to confirm. Many thanks. Now I will have a very good example of the 6570b (8GB, SSD, and now FHD screen).
3130
 | 
February 25th, 2015 06:29 AM
I currently have Yosemite 10.10.2 running fine on my 6570b with Clover UEFI. No issues whatsoever. I have just realised that I can upgrade the screen to either 1600x900 or even 1920x1080 (there were models with these screens). What I need to know if this will cause any issues with my installation. I currently have the 1366x768 screen. ...
3130
 | 
November 29th, 2014 06:03 AM
Erm.... No offence, but I don't really have the time to provide advice as and when you need it. However, I have posted in your thread, so I will keep an eye on it and try to answer anything I can. ;)
100
 | 
November 29th, 2014 05:52 AM
I didn't leave any details out, I ended up reinstalling everything. I initially fitted the motherboard to the case using JB Weld and motherboard mounts. However, I ended up buying a motherboard tray and using that method instead. The JB Weld method was clearly documented with photos, but I removed them and the text detailing this as it was...
4
Page 1 of 3123

Most Recent Recommended Threads