Contribute
Register

My first Hackintosh, please help (so confused!!)

Status
Not open for further replies.
elya

elya

Joined
Jan 31, 2014
Messages
133
Motherboard
Acer Aspire 7745G-5454g64mnks
CPU
i5 450M
Graphics
HD 5650 1600x900 // GMA HD
Mobile Phone
  1. Android
Hi everybody!! Good evening to you all! :)
I'm new around here, a newbie. My wish is to install mavericks on my pc, but i've encountered a few problems. First of all, my specs:


Notebook: Acer Aspire 7745g
Graphics: ATI Mobility Radeon HD5650 + Intel (r) HD Graphics (switchable graphics cards)
CPU: Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz
Audio: Realtek ALC670 @ Intel Ibex Peak PCH + ATI Radeon HDMI @ ATI Redwood/Madison
Wi-Fi: Broadcom BCM43225 802.11b/g/n Wireless Network Adapter

Now here's my problems:

1) I've found some kexts working for my wifi from here https://github.com/toleda/airport_pcie-hm (it's just github, i hope this doesn't matter with the forum's rules...) but even reading the "readme" files, i don't understand anything!! So if you don't mind, i need some help in here.

2) I can't change my screen resolution (i had boot with graphicsenabler=no, since i have a 5xxx series...but if someone has better information, please let me know)

3) Everytime i run multibeast, every reboot after my system crash with "system uptime in nanoseconds" (not always, just sometimes...yes, i have installed os x so many times!! :banghead: )

So, here we are, finish...if something comes in my mind, i will edit the post.
Thanks to everyone who read my post and helps me!

Best regards! :D
 
elya said:
Hi everybody!! Good evening to you all! :)
I'm new around here, a newbie. My wish is to install mavericks on my pc, but i've encountered a few problems. First of all, my specs:


Notebook: Acer Aspire 7745g
Graphics: ATI Mobility Radeon HD5650 + Intel (r) HD Graphics (switchable graphics cards)
CPU: Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz
Audio: Realtek ALC670 @ Intel Ibex Peak PCH + ATI Radeon HDMI @ ATI Redwood/Madison
Wi-Fi: Broadcom BCM43225 802.11b/g/n Wireless Network Adapter

Now here's my problems:

1) I've found some kexts working for my wifi from here https://github.com/toleda/airport_pcie-hm (it's just github, i hope this doesn't matter with the forum's rules...) but even reading the "readme" files, i don't understand anything!! So if you don't mind, i need some help in here.

2) I can't change my screen resolution (i had boot with graphicsenabler=no, since i have a 5xxx series...but if someone has better information, please let me know)

3) Everytime i run multibeast, every reboot after my system crash with "system uptime in nanoseconds" (not always, just sometimes...yes, i have installed os x so many times!! :banghead: )

So, here we are, finish...if something comes in my mind, i will edit the post.
Thanks to everyone who read my post and helps me!

Best regards! :D
Click to expand...

Your graphics are not really supported, but some people get them to work... see: http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/

Radeon in a switched configuration is not supported.

For your WiFi all you need is to install toledaARPT.kext. See thread here: http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html

If you're getting a KP after running Multibeast, you're not installing something correctly. Without seeing a photo of the actual KP, I can't give you any ideas.
 
RehabMan said:
Your graphics are not really supported, but some people get them to work... see: http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/

Radeon in a switched configuration is not supported.

For your WiFi all you need is to install toledaARPT.kext. See thread here: http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html

If you're getting a KP after running Multibeast, you're not installing something correctly. Without seeing a photo of the actual KP, I can't give you any ideas.
Click to expand...

first of all, thanks for the immediatly answer.
Then, i know that guide, i found it on the internet (it's what i linked) but i don't know how to install, i don't understand this tutorial, because i'm a newbie! What do i have to do? If you don't mind, would you please tell me step by step? im' here for learning! :)
 
elya said:
first of all, thanks for the immediatly answer.
Then, i know that guide, i found it on the internet (it's what i linked) but i don't know how to install, i don't understand this tutorial, because i'm a newbie! What do i have to do? If you don't mind, would you please tell me step by step? im' here for learning! :)
Click to expand...

Download toledaARPT.kext from here: https://github.com/toleda/airport_pcie-hm/raw/master/airport_kext_enabler/toledaARPT.kext.zip

Install with Kext Wizard.
 
elya said:
that's all?? in the tutorial he talk about an edited io80211family.kext...
do i just have to install toledaarpt.kext and no more? o_O
Click to expand...

There's a bunch of different ways to accomplish the same task:
- DSDT edits
- adding an SSDT
- editing IO80211Family.kext (actually one of its PlugIns)
- and finally an "injector" kext such as toledaARPT.kext

The injector kext is one of the best ways to accomplish it and also one of the easiest.
 
RehabMan said:
There's a bunch of different ways to accomplish the same task:
- DSDT edits
- adding an SSDT
- editing IO80211Family.kext (actually one of its PlugIns)
- and finally an "injector" kext such as toledaARPT.kext

The injector kext is one of the best ways to accomplish it and also one of the easiest.
Click to expand...

so, just to be sure: i push toledaarpt.kext in s/l/e, reboot and my wi fi should works? if yes, for tonight i'm done, and i will return for other things! :)


edit

my God now i understand why every reboot it gave me errors! cause i've ALWAYS pushed togheter toleda and the modified io80211family!!
 
elya said:
so, just to be sure: i push toledaarpt.kext in s/l/e, reboot and my wi fi should works? if yes, for tonight i'm done, and i will return for other things! :)
Click to expand...

Yes. Restore IO80211Family.kext to the original. Then install toledaARPT.kext with Kext Wizard. Repair permissions & rebuild cache for good measure and reboot.
 
RehabMan said:
Yes. Restore IO80211Family.kext to the original. Then install toledaARPT.kext with Kext Wizard. Repair permissions & rebuild cache for good measure and reboot.
Click to expand...

Thanks! Tomorrow i'm gonna try and let you know. Thank for your kindness, you were very helpful with me! Sorry for my bad english xD
 
RehabMan said:
Yes. Restore IO80211Family.kext to the original. Then install toledaARPT.kext with Kext Wizard. Repair permissions & rebuild cache for good measure and reboot.
Click to expand...

Hey, i tried like you said here, but now it freeze me while starting the os! So i ran -v to see what happens and that's what i've got:

IMG_20140213_035748.jpgIMG_20140213_035816.jpg
the strange thing is that if i run -x safe mode, it works perfectly, even with wi fi!! what should i do? help, please! :banghead:
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top