Contribute
Register

Help with Mavericks Bootloader Issue / GA-H81M-HD3

Status
Not open for further replies.
Joined
May 29, 2014
Messages
6
Motherboard
MacBook Pro 13" Mid 2012
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
[Stuck at Apple Logo] Help on install of Mavericks/ Kernel Panic??!

So I am in the process of building my first hackintosh, and I have successfully finished the build (or at least enough for boot load) and I have made my unibeast drive and connected to my case and when I begin the process, this screen shows up. Unless I am wrong, this must be a kernel panic, in which case I am sad :cry: and I am not sure what to do here. I am a newbie so I apologize in advance if the solution to this is simple.
photo.jpg

Now my BIOS Settings are as followed:

Initial Display: IGFX

XHCI Mode: Enabled

This I was able to do by this link. But I still do not know what to do because I am stuck at the screen shown above.

Build:

GA-H81M-HD3


Intel i3 4360


HyperX Blu 4GB 1600MHz DDR3


Samsung 120gb ssd


WD 500 GB Sata Drive


Rosewill fbm-01-450p dual fans microatx mini tower case w/ 450W PSU

TP-LINK TL-WDN4800 WiFi Card


Again any help can be useful.
 
Also, I have run the -x and -v together and I took a picture of what is on my screen

photo-1.jpg

Please if there is anyone out there who can help it would be greatly appreciated!!!!
 
Another update here, well I moved the ram to the second slot available and then I used the -x -v along with maxmem=2048 flag provided by Adrian B in a install guide here. Again I have the optimized default, igfx enabled, and this is what appears.
photo3.jpg
I'm hopeful that someone will take a look at this and help.
 
Status
Not open for further replies.
Back
Top