- Joined
- Feb 4, 2012
- Messages
- 15
- Motherboard
- GA-EP45T-UD3LR
- CPU
- 2.4 GHz Quad-Core Intel Xeon
- Graphics
- ATI Radeon HD 5000
- Mac
- Classic Mac
- Mobile Phone
Brought this older board some new OS recently for a friend of mine, thought I'd share the steps I took here!
Use Unibeast Walkthrough to create boot USB:
http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html
*If boot seems screwy, reset to optimal configuration and change HPET to 64-bit in Bios
Also, in Advanced BIOS Features, change Virtualization Technology to Disabled!
Boot USB using F12 and using -v -x flags.
Install OS X
Restart
Boot USB once again with OS X HD selected using -v -x flags.
*** If Boot0 error appears on initial startup:
http://www.tonymacx86.com/25-boot0-error-official-guide/comments2.html#comments
From website:
Boot back into USB using flags -v -x, open Disk Utility and unmount OS X partition. Make a note of Sata port IE disk1s2 in this example by selecting the unmounted partition and choosing “info"
open terminal and type:
dd if=/Volumes/USB/usr/standalone/i386/boot1h of=/dev/disk1s2
(All one line with a space between "boot1h" and "of=")
Restart
Load G41MES2Lconfig.mb using multibeast and install using provided custom DSDT.aml
Restart with no flags.
Check sound and ethernet. Run any APP updates (not system updates).
iMessage will not work, run fix here:
http://www.tonymacx86.com/general-help/110471-how-fix-imessage.html
For HWSensors, go to:
https://github.com/kozlek/HWSensors
Look for the source forge link for the latest version near the bottom of the page.
Any questions, post up here and I'll do my best to respond! Good luck, this took SEVERAL hours and trial and error. Special thanks to Hawaii50 and Solar from insanelymac for assistance!
Use Unibeast Walkthrough to create boot USB:
http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html
*If boot seems screwy, reset to optimal configuration and change HPET to 64-bit in Bios
Also, in Advanced BIOS Features, change Virtualization Technology to Disabled!
Boot USB using F12 and using -v -x flags.
Install OS X
Restart
Boot USB once again with OS X HD selected using -v -x flags.
*** If Boot0 error appears on initial startup:
http://www.tonymacx86.com/25-boot0-error-official-guide/comments2.html#comments
From website:
Boot back into USB using flags -v -x, open Disk Utility and unmount OS X partition. Make a note of Sata port IE disk1s2 in this example by selecting the unmounted partition and choosing “info"
open terminal and type:
dd if=/Volumes/USB/usr/standalone/i386/boot1h of=/dev/disk1s2
(All one line with a space between "boot1h" and "of=")
Restart
Load G41MES2Lconfig.mb using multibeast and install using provided custom DSDT.aml
Restart with no flags.
Check sound and ethernet. Run any APP updates (not system updates).
iMessage will not work, run fix here:
http://www.tonymacx86.com/general-help/110471-how-fix-imessage.html
For HWSensors, go to:
https://github.com/kozlek/HWSensors
Look for the source forge link for the latest version near the bottom of the page.
Any questions, post up here and I'll do my best to respond! Good luck, this took SEVERAL hours and trial and error. Special thanks to Hawaii50 and Solar from insanelymac for assistance!