Contribute
Register

[Guide - Success] P5Q Pro Turbo, Q8200 Quad, GeForce GT240, 8GB Kingston Ram, OSX Mavericks 10.9

Status
Not open for further replies.
Joined
Feb 4, 2012
Messages
45
Mac
  1. MacBook Pro
Classic Mac
  1. 0
Mobile Phone
  1. iOS
[Guide - Success] P5Q Pro Turbo, Q8200 Quad, GeForce GT240, 8GB Kingston Ram, OSX Mavericks 10.9.2

Hi all,

I just thought i would share what i have done to get my system working with OSX Mavericks 10.9.2, so people with similar builds could use this as a guide and also help each other out with other problems that may occur.

Well 1st of all this is my system:

Motherboard - P5Q Pro Turbo
Processor - Q8200 Quad Core (3.2GHz Over-clocked)
Memory - 8 GB 914 MHz DDR2 SDRAM
GPU - GeForce GT240 1024MB
Kingston 128GB V200 SSD
Seagate Barracuda 250GB 7200RPM (Which i use for Time Machine backups)
TP-Link PCI Express Wifi Adapter TL-WDN4800 (Works Natively)
Belkin F8T017 Bluetooth adaptor (Works Natively)
Apple Magic Mouse
Apple Magic Trackpad
Apple Wireless Keyboard
Samsung SyncMaster 205 BW Display 1670 x 1050
Sony SRS D21 2.1-channel multimedia speaker/sub system

So lets begin:

Most parts are taken from Tony's Guide and edited to suite P5Q Pro Turbo owners.

You will need already downloaded:

UniBeast 3.0.1 (or latest version)
Multibeast Mavericks 6.2.1 (or latest version)
My DSDT file and Kext files that are attacthed to this post

STEP 1: Download OSX Mavericks
The full operating system is a free download for anyone who has purchased Mac OS X Snow Leopard, Lion, or Mountain Lion. Download the Application from the Mac App Store using your Apple ID on any Mac or functional computer running Mac OS X 10.6.8 or later.

STEP 2: Create a Bootable USB Drive Using UniBeast 3.0.1 (or latest version)
Take a deep breath and take your time- this is pretty simple, but it's easy to miss things if you rush. Follow each step to the letter.

1. Insert the USB drive
2. Open /Applications/Utilities/Disk Utility
3. Highlight the USB drive in left column
4. Click on the Partition tab
5. Click Current and choose 1 Partition
6. Click Options...
7. Choose Master Boot Record
8. Under Name: type USB
9. Under Format: choose Mac OS Extended (Journaled)
10. Click Apply then Partition
11. Run UniBeast 3.0.1 (or latest version)
12. Click Continue, Continue, Continue, Agree
13. At Destination Select, choose USB and click Continue
14. Choose Mac App Store Mavericks - 10.9.2
15. Enter password and click Install
This process took me about 30 mins, but it depends how fast your USB is so it could be faster/slower.

STEP 3: Install OS X Mavericks
My BIOS is set to default apart from my over-clock which i left as it was, then set your Hard-drive to AHCI mode.

1. Turn on the computer
2. Press F8 to choose boot device
3. Choose your USB that you created with Unibeast.
4. At the Chimera Boot Screen, choose USB and type GraphicsEnabler=Yes, PCIRootUID=0 (This may vary depending on your graphics card) and press enter.
If you have trouble reaching the installer, type -x at the Boot screen. You can type the boot flags GraphicsEnabler=Yes, PCIRootUID=1, PCIRootUID=0, and npci=0x3000 by themselves or together in order to solve boot issues for older graphics cards and machines. Type -v to bypass the Apple boot screen and enter verbose startup mode. For further explanations of boot flags, check out the post http://tonymacx86.blogspot.co.uk/2010/04/iboot-multibeast-install-mac-os-x-on.html
5. When you arrive at the Installer, choose language.
6. For a new installation of OS X, you MUST format the destination drive according to the following steps before continuing.
NOTE: If you are upgrading from Snow Leopard, Lion or Mountain Lion and you want to keep your files and apps, you can skip steps a-j.

a. In the top menu bar choose Utilities, and open Disk Utility
b. Highlight your target hard drive for the Mavericks installation in left column.
c. Click Partition tab
d. Click Current and choose 1 Partition
e. Click Options...
f. Choose GUID Partition Method
g. Under Name: type Mavericks
h. Under Format: choose Mac OS Extended (Journaled)
i. Click Apply then Partition
j. Close Disk Utility

7. When the installer asks you where to install, choose Mavericks, or your existing install.
8. Upon completion, restart the system. (I had to move my mouse every now and then during the install to stop it from freezing).

STEP 4: Post-Installation Using MultiBeast

1. Turn on the computer
2. Press F8 to choose boot device
3. Choose your USB that you created with Unibeast it will then display Chimera boot screen again
4. At the Chimera Boot Screen, choose your new Mavericks installation (Hard drive).
Remember to boot using GraphicsEnabler=Yes PCIRootUID=0. (Or whatever boot flag combination that worked for you to get to the installation screen)
5. Complete Mac OS X Mavericks setup (don't setup WiFi yet). After setup you should arrive at your desktop (you can now eject your Unibeast USB).
6. Get my DSDT.aml file (you will need to unzip it 1st) and place it on your desktop (this DSDT is working with the latest BIOS version for our P5Q Pro Turbo motherboard).
7. Open and run Multibeast Mavericks 6.2.1 (or latest version)
Click continue, continue, continue, agree. Then Click Quick Start and choose UserDSDT and select my DSDT file.
All I had to select from Drivers were Trim Enabler due to my SSD and IOAHCIBlockStorageInjector due to my internal drives orignally showing up as external (we will install network and sound later using kexts). This part is going to be different for everybody depending on your system, so select any further drivers / boot flags that you may need to enable your graphics etc (I needed to add GraphicsEnabler=Yes boot flag). I didn't customize anything in the Customize section but do so as you wish.
8. Click Print or Save to back up your configuration
9. Click Build then Install
10. Once Multibeast has finished restart your system, this time your system should boot on its own straight into OSX Mavericks.
11. Now we need to get Network and Sound working, so get the 2 kexts that are attached AtherosL1eEthernet.kext & VoodooHDA VT1708S.kext (the VoodooHDA VT1708S.kext has been patched for the P5Q Pro Turbo motherboard, so features like keyboard volume works etc).
12. I use Kext Utility to install my kexts but use whichever program you want. I had to delete the appleHDA.kext due to kernal panics so i would recommend doing that before installing the 2 kexts, you will find it in /System/Library/Extensions folder. With Kext Utility all i did was drag and drop the 2 kext files onto the Kext Utility icon and then Kext Utility did the rest. Once it has finished restart your machine.
13. When you are back at your desktop open System Preferences and click on sound. On output tab select your desired output (I use Line-out (Green Rear). You should find that you now have sound and you can also adjust the volume with your keyboard etc.
14. Now while you are still in System Preferences click on Network. Now click on create a new service (the + icon) and select Interface: Ethernet, then Service Name (I just left it as ethernet) then click create. If you are using ethernet then you are now done, if you are using WiFi like me click on create a new service (the + icon) and do the same for your WiFi (this will only work if your WiFi Natively works in OSX) then just configure your wireless connection. NOTE: even if you are going to use WiFi you must create your ethernet settings 1st otherwise you will have problems signing into iCloud, App Store, iTunes, FaceTime etc. If you accidentally set up WiFi 1st then you will need to delete NetworkInterfaces.plist which you can find in /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist. Then create your connections again (ethernet connection 1st and then your WiFi connection 2nd).

All done you should now have a stable 10.9.2 OSX Mavericks custom build, so far everything seems to be working fine including sleep (i can even let my hard drives go to sleep and they wake up when i press the power button).

AboutThisMac_zpsd34af690.jpg

Screen_zps7b34ccfb.jpg


Please leave any comments/questions about this guide (good or bad) and i will reply (Please don't PM me as if the questions get answered in this topic it may help other people). Also leave any comments on how this guide may have helped you, even if you have done things differently.

Thanks

Andy.
 

Attachments

  • AtherosL1eEthernet.kext.zip
    22 KB · Views: 841
  • VoodooHDA VT1708S.kext.zip
    77.4 KB · Views: 805
  • DSDT.aml.zip
    18 KB · Views: 869
Thank you very much for this and especially for the dsdt config
 
Hey, thanks for the guide. Worked really well coming from SL after the combo update.

I've installed Mavericks just fine only having to enter the "GraphicsEnabler=Yes" flag to get to the install, however once I've ran Multibeast it just hangs on the Apple boot screen forcing me to re install again.

I haven't had the chance to try and boot without your DSDT.aml and just using the easybeast option, which I'll probably try tonight when I get home!

Just wondering did you have the issue mentioned above at all?

Thanks again.


*FIXED* - Just installed using Easybeast and using the required the GraphicsEnabler=Yes flag and woop - it worked well. Guessing it may have something to do with my bios not being the same version as yours? :crazy:
 
Sorry for really late reply.

I had to use GraphicsEnabler=Yes boot flag to also get it to boot after installing MultiBeast.

I didn't put it in the guide as some people won't need to, but I'll add it now so people who need it know where to add it.

Glad the guide helped you.
 
hej i have a question motherboard: asus p5q why wont it install :/

Screenshot

photo.jpg
 
hej i have a question motherboard: asus p5q why wont it install :/

Screenshot

View attachment 84086

Is your motherboard the Asus P5Q Pro Turbo?

This guide is only for the Asus P5Q Pro Turbo and it may or may not work on other P5Q series motherboards.

To your issue / screenshot

Is this from trying to boot using Unibeast USB?

Have you got all of the BIOS settings correct?
 
I've used your guide and I was able to install Mavericks WITHOUT any flags, however, when I use Multibeast for Mavericks and load your DSDT, the computer freezes on the white apple screen. I'm a bit lost now as I'm new to this. any suggestions.

Asus PQ5 Pro Turbo Bios 7.01
GeForce GTS8800
Corsair Force GT 240GB SSD
 
I've used your guide and I was able to install Mavericks WITHOUT any flags, however, when I use Multibeast for Mavericks and load your DSDT, the computer freezes on the white apple screen. I'm a bit lost now as I'm new to this. any suggestions.

Asus PQ5 Pro Turbo Bios 7.01
GeForce GTS8800
Corsair Force GT 240GB SSD

i ' ve the same problems, the pc freeze .. When i reboot after i run multibeast with your dsdt file
the error is :
Still waiting for root device
I try with GraphicsEnabler=Yes or not
piffi
 
Status
Not open for further replies.
Back
Top