Mac Pro 2008 Clean As Possible

Hi Everyone,

I recently came across a 2008 (I believe? Serial is G88501ZVXYL) Mac Pro case. I am looking to build a beast inside of this already stunning case, while keeping the outside (and most of the inside) looking as close to stock as possible. I saw another user's post (http://www.tonymacx86.com/completed-mods/80884-mac-pro-early-2009-case-mod-haximus-pro.html) and loved what they did in their build. Unfortunately, after countless efforts of contacting them, I have had absolutely zero luck.

I am new to case modding, so naturally that's where I needed the most guidance/help. It appears that the user in the specified post above lacks detail in their case modding process, which is why I am now reaching out to the rest of the forum in a plea for help.

If anyone experienced with Mac Pros/Case modding would mind assisting me, I would be more than happy. Thank you

This thread is a classic: http://www.tonymacx86.com/mac-pro-m...kpro-gigabyte-z68mx-ud2h-b3-mac-pro-case.html

And here's another one: http://www.tonymacx86.com/mac-pro-mods/28892-neilharts-mac-pro-hack.html

Stork said:

This thread is a classic: http://www.tonymacx86.com/mac-pro-m...kpro-gigabyte-z68mx-ud2h-b3-mac-pro-case.html

And here's another one: http://www.tonymacx86.com/mac-pro-mods/28892-neilharts-mac-pro-hack.html

Click to expand...

I will check out the both of those, thank you!

10frank10 said:

Hi Everyone,

I saw another user's post (http://www.tonymacx86.com/completed-mods/80884-mac-pro-early-2009-case-mod-haximus-pro.html) and loved what they did in their build. Unfortunately, after countless efforts of contacting them, I have had absolutely zero luck.

It appears that the user in the specified post above lacks detail in their case modding process

Click to expand...

I didn't leave any details out, I ended up reinstalling everything. I initially fitted the motherboard to the case using JB Weld and motherboard mounts.

However, I ended up buying a motherboard tray and using that method instead.

The JB Weld method was clearly documented with photos, but I removed them and the text detailing this as it was irrelevant to the final build.

The method I used in the end is a simple one. I cut out the section at the bottom of the case, which supports the CPU tray. This makes room for the motherboard.

Then you have to buy a motherboard tray, and by eye calculate where the tray will end up. Mark the back of the case up, and cut away. The trick is to not cut away too much at first or you will end up with the tray not being able to attach to anything.

I also cut a hole out to mount the PSU in the top, and used a PSU mounting plate to cover the hole up.

That was my first and only attempt at case modding. To be honest, it was an expensive mod, as I had to buy all the Apple case components, and modify some of them too. The CPU tray is heavily modified to ensure it doesn't hit the motherboard, CPU fan etc.

Just buy your bits, and go for it. Measure up, and cut away, but with a lot of thought beforehand.

Good luck, and I did reply in my thread to you, albeit late, but I did.

Like I said in my thread, look at all the mods done with Mac Pro cases, and take as much from them as you can, and in the end, you should have a game plan. Remember, nobody sees the back of the case anyway, so it need not be perfect!

shokka9 said:

... Remember, nobody sees the back of the case anyway, so it need not be perfect!

Click to expand...

Bingo! You got that right. But, be neat with your cutouts, file the edges smooth and/or use some rubber edging (split tube type) because you have to stick your fingers back there to attach "stuff".