Hp probook G1 450 / bluetooth question and restart question

Hello everybody, i have a question about installing bluetooth kext on my 10.10.1 yosemite os. BCM43225HMB is my card (i replaced the reinstalled one) .. after installing OS X where everything went perfectly i also installed - HP ProBook Installer Clover Edition 6.2.15 RC8 -everything works perfectly wifi started to work but bluetooth didn't.
I tried with permission repair but no luck, also i did the reinstalling the whole OS X if i missed something. nothing happened. any idea what to do?

Second question is, ... what should i do if the computer won't restart by itself when i choose so. i must shut it down and boot it once again.

I have an extra disk bay with SSD / mac OS X .. and other disk with win7 reinstalled. i manage to do a boot option from start menu by choosing hybrid UEFI in bios. Everything is working except this two things.

If you have any idea how to fix that i would be grateful.

Specs:

MacBook Pro (Retina, 15-inch, Late 2013)
z Intel Core i7, 8 GB 1600 MHz DDR3, Intel HD Graphics 4600 1024 MB,

Madam said:

...
Specs:

MacBook Pro (Retina, 15-inch, Late 2013)
z Intel Core i7, 8 GB 1600 MHz DDR3, Intel HD Graphics 4600 1024 MB,

Click to expand...

If you have a MacBookPro, what are you doing on a hackintosh site?

Madam said:

Hello everybody, i have a question about installing bluetooth kext on my 10.10.1 yosemite os. BCM43225HMB is my card (i replaced the reinstalled one) .. after installing OS X where everything went perfectly i also installed - HP ProBook Installer Clover Edition 6.2.15 RC8 -everything works perfectly wifi started to work but bluetooth didn't.
I tried with permission repair but no luck, also i did the reinstalling the whole OS X if i missed something. nothing happened. any idea what to do?

Click to expand...

Does your bluetooth chip require a firmware uploader? Did you install one?

Second question is, ... what should i do if the computer won't restart by itself when i choose so. i must shut it down and boot it once again.

Click to expand...

What happens on restart?

What is your bluetooth vendor id - device id?

Dear Mr. Rehab Man ... I have Hp probook 450 G1 / i installed via clover 10.10.1 osx so when i hit the button about this mac this was the text in specs window

nguyenmac said:

What is your bluetooth vendor id - device id?

Click to expand...

[FONT=Arial, Verdana, Helvetia]1.Broadcom Mini PCI Express "half size" Wireless 802.11n 300MB + Bluetooth 3.0 /// Azur Wave AW NB290W[/FONT]

[FONT=Arial, Verdana, Helvetia]I didn't update any firmware drivers.. where to do that? // Rehab man .. ?

i did a screen shot of the card.


2. when i hit restart button, the system goes down like it should but dost not "retrigger" by itself. I must power down the hp probook and power it on again [/FONT]

this is the picture of the card greets

You have to find your bluetooth vendor/device id.

Go to system information > usb and find it.

You can use Windows too.

You mean this? thanks in forward !

nguyenmac said:

You have to find your bluetooth vendor/device id.

Go to system information > usb and find it.

You can use Windows too.

Click to expand...

Madam said:

You mean this? thanks in forward !

Click to expand...

That is your fingerprint.

Based on your picture, I don't see any Bluetooth in USB bus. Probably you didn't enable Bluetooth in BIOS, or your card doesn't have Bluetooth. Go to Windows and see if your Bluetooth works.