Ask for help! HP 8470P with amd 7570, stuck in "root device uuid=XXXXX"

hi, everyone
my HP 8470P with amd 7570m, intalled maverisks 10.9.4 following the guide in this link
http://www.tonymacx86.com/hp-probook-mavericks/112383-guide-install-mavericks-clover-bootloader.html.

after finished 13. run the HP probook installer clover edition 6.2.5, reboot by clover stuck in “root device uuid=XXXXXX"
is there someone have the same model encount this situation ?
or someone knows the solutions? thanks.

I have 8470p without AMD, have you disabled graphics in bios and using HD4000?

Other than the graphics, the clover guide works without fault on this model from my experience.(HD4000 only)

Confirm what options you chose in pro book installer..

edit* you may have to delete AMD graphics kexts, but read about for confirmation on your card..

thank u for sharing. i can't find the IGD option in bios. it seems hd4000 is hided.
unless find some ways to modify bios for turning on the hd400,
or drive the amd graphic card.

seven4 said:

thank u for sharing. i can't find the IGD option in bios. it seems hd4000 is hided.
unless find some ways to modify bios for turning on the hd400,
or drive the amd graphic card.

Click to expand...

You won't be able to disable AMD in your Elitebook.

So you can boot by USB, but not after using PBI CE right?

Exactly! I will upload my install.log, PBI setting, clover config.plist soon later.
And what else should i provide?
please help! thanks

seven4 said:

Exactly! I will upload my install.log, PBI setting, clover config.plist soon later.
And what else should i provide?
please help! thanks

Click to expand...

Boot from USB, mount EFI, inside /EFI/Clover in EFI partition, there will be a ROM folder. Try moving that folder to somewhere and boot from HDD.

moving the ROM folder to Desktop does not work.
stuck at the same point.
here are my PBI setting list
1.Clover Uefi
2.OS X support kexts->Business model->6x70b/8x70p AMD
3.config and dsdt patcher ->HP Laptop->Business model->6x70b/8x70p AMD
->fan behavior->readings only
->display type->low-resolution screen
4.ssdt generator
5.misc os x fixes->Elitebook logos
->color profiles
6.extra tools
PS:also i tried to check fix EDID under the misc osx fixes, turned out the same.

below are my config.plist of clover and install.log under /var/log , please help me check them. thanks
View attachment Archive.zip

Please post EFI/CLOVER in EFI partition too.

nguyenmac said:

Please post EFI/CLOVER in EFI partition too.

Click to expand...

finaly uploaded.please
View attachment CLOVER.zip

Try replace this in EFI/Clover of EFI partition: