Contribute
Register

Slow SSD...?

Status
Not open for further replies.
Joined
May 29, 2014
Messages
67
Motherboard
GA-Z97M-DS3H
CPU
i3 4360
Graphics
GTX 950
Mobile Phone
  1. iOS
http://imgur.com/BuucUqH,iGgSLtJ

Above are two screenshots, one of a BlackMagic SpeedTest, and another of my SATA section from system report... :( Anyone know how to fix these slow write speeds? I was expecting more from a Kingston 120 GB SSD...

http://www.newegg.com/Product/Product.aspx?Item=N82E16820721107

This is the SSD I bought. I DO have the trim patched enabled from Multibeast btw...

I have now enabled the Intel Genric AHCI SATA fix for 9 series motherboard from within Yosemite Multibeast, so now it shows up as Intel 9 Series Chipset instead of generic AHCI Sata but no difference in ssd speeds :(

SOLVED: I read somewhere on here that BlackMagic Speed test doesn't accurately read SSD Speeds for some reason after version 2.1, so i tried AJA Speed test for my SSD and sure enough i'm getting the speeds I should be getting, around anywhere from 400-490 for read and 380-465 ish for Write :D
 
Intel Genric AHCI SATA fix for 9 series motherboard...

SOLVED: I read somewhere on here that BlackMagic Speed test doesn't accurately read SSD Speeds for some reason after version 2.1, so i tried AJA Speed test for my SSD and sure enough i'm getting the speeds I should be getting, around anywhere from 400-490 for read and 380-465 ish for Write :D

Wondering if you have any experience with this on El Cap? I am having slowness issues with my SSD. I had the Generic 3rd Party SATA thing installed, but switched to the Intel one when I realized I should be using it. Still seeing only about 30-50 MB/sec when using Finder to copy files. Thanks for any guidance or suggestions.

I have a thread here: http://www.tonymacx86.com/threads/ssd-speed-advice.201224/
 
Wondering if you have any experience with this on El Cap? I am having slowness issues with my SSD. I had the Generic 3rd Party SATA thing installed, but switched to the Intel one when I realized I should be using it. Still seeing only about 30-50 MB/sec when using Finder to copy files. Thanks for any guidance or suggestions.

I have a thread here: http://www.tonymacx86.com/threads/ssd-speed-advice.201224/


I actually will check if I do. I'm on El cap now, lookin to upgrade, but I will check for you. Tomorrow. Sorry for such a late response. I'm a bit inactive here and busy with school at the moment. I will get back to you tomorrow after classes.
 
Status
Not open for further replies.
Back
Top