Contribute
Register

stick on loading screen

Status
Not open for further replies.
seanjk

seanjk

Joined
Sep 18, 2014
Messages
1
CPU
i5 4670K
Graphics
GE Force760
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hi, I'm new to the hackintosh community. I built a computer using the august buyers guide. I've been following the Unibeast installation procedures and I installed mavericks. when boting from the USB, I see the Icon for it, but clicking it leads to a white screen with the apple logo and a loading icon that doesn't go away. Any ideas regarding what might cause this are greatly appreciated.
 
when boot chimera, add the flag -v and then tell us where you stuck
post your system specs
 
please list your hardware also bios settings no help atm lol
 
Stuck on loading screen after usb install using clover. SSD show but will not boot it just sits on the apple logo and spinning wheel. i have reinstalled the OS seven times.

4790k
asus z97 deluxe
750watt psu
16gb ballistix ram
r9 280x gpu

Any help:banghead:
 
whats your bios settings? have you disabled vt-D?
 
Chrom said:
Stuck on loading screen after usb install using clover. SSD show but will not boot it just sits on the apple logo and spinning wheel. i have reinstalled the OS seven times.

4790k
asus z97 deluxe
750watt psu
16gb ballistix ram
r9 280x gpu

Any help:banghead:
Click to expand...
Chrom
Have you disabled the integrated graphics via the bios and selected the 280x to initiate first the issue is two things Intel changed the device Ids on the 9 series motherboards for audio and integrated graphics so they are no longer supported natively and require a patch to work around audio will not stop a boot up normally unless using voodooHDA with AppleHDA that causes kernel panics but graphics will cause system hangs the r9 280x requires GraphicsEnabler=Yes boot flag which sometimes tries to initiated the unsupported integrated graphics hence the need to disable it via the bios to test this theory boot with -x GraphicsEnabler=Yes or just disable the integrated graphics via the bios and boot up with GraphicsEnabler=Yes and add that boot flag to your config.plist since using clover use clover configurator to mak it easier on ya

Also thread hijacking is fround upon here at tonymacx86 next time make your own thread
 
carpentryplus25 said:
Chrom
Have you disabled the integrated graphics via the bios and selected the 280x to initiate first the issue is two things Intel changed the device Ids on the 9 series motherboards for audio and integrated graphics so they are no longer supported natively and require a patch to work around audio will not stop a boot up normally unless using voodooHDA with AppleHDA that causes kernel panics but graphics will cause system hangs the r9 280x requires GraphicsEnabler=Yes boot flag which sometimes tries to initiated the unsupported integrated graphics hence the need to disable it via the bios to test this theory boot with -x GraphicsEnabler=Yes or just disable the integrated graphics via the bios and boot up with GraphicsEnabler=Yes and add that boot flag to your config.plist since using clover use clover configurator to mak it easier on ya

Also thread hijacking is fround upon here at tonymacx86 next time make your own thread
Click to expand...



Thanks for the quick response, did not mean to hijack the thread.
 
carpentryplus25 said:
It's ok hopefully that fixed your issues
Click to expand...

Yes it did, once again thanks. Now i just have to figure out how to get it to boot out of safe mode with my graphics card plugged in.:D
 
Chrom said:
Yes it did, once again thanks. Now i just have to figure out how to get it to boot out of safe mode with my graphics card plugged in.:D
Click to expand...
Are you using GraphicsEnabler=Yes with it plugged in if not u should be
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top