- Joined
- Mar 9, 2013
- Messages
- 15
- Motherboard
- GA-Z97X-UD3h
- CPU
- 4.0 ghz
- Graphics
- Gforce 760
- Mac
- Classic Mac
- Mobile Phone
Hello,
I've started my build and here are my parts
The Build
i7-4790K 4Ghz 8MB Cache LGA1150
GA-Z97x-UD3H REV 1.0 BIOS ver F4
16gig Ram
2 Kingston 120Gig SSD - One for Windows 7
EVGA 7508 power supply
Geforce GTX 760
Cheap Case
DVD Burner
I've installed Mavericks using -x -v GraphicsEnabler=No PCIRootUID=0
The install is perfect. I still have to use the codes it get in after the first install.
I use Multibeast and use these settings that I've found on here.
Drivers > Disk > TRIM Enabler > 10.9.x TRIM Patch
Drivers > Misc > FakeSMC v6.8.1307
Drivers > Misc > FakeSMC v6.8.1307 Plugins
Drivers > Misc > FakeSMC v6.8.1307 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal
Drivers > Network > Intel > AppleIntelE1000e v3.0.4.1a
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v3.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > Use KernelCache
Customize > Boot Options > 1080p Display Mode
Customize > System Definitions > Mac Pro > Mac Pro 6,1
Now I have disabled the on board graphics card. I've been using the 760 the whole time during install.
When I look in the Mac OSX info... it says 4600 graphics (null) Even when I'm using the 760
I have installed OSX like 20 times or more... I'm really getting tired.
Is there an easy fix for this or am I pooched?
As of right now... I'm only getting the Apple logo at start up and it freezes. Even with the codes... nada
On to install #21
I've started my build and here are my parts
The Build
i7-4790K 4Ghz 8MB Cache LGA1150
GA-Z97x-UD3H REV 1.0 BIOS ver F4
16gig Ram
2 Kingston 120Gig SSD - One for Windows 7
EVGA 7508 power supply
Geforce GTX 760
Cheap Case
DVD Burner
I've installed Mavericks using -x -v GraphicsEnabler=No PCIRootUID=0
The install is perfect. I still have to use the codes it get in after the first install.
I use Multibeast and use these settings that I've found on here.
Drivers > Disk > TRIM Enabler > 10.9.x TRIM Patch
Drivers > Misc > FakeSMC v6.8.1307
Drivers > Misc > FakeSMC v6.8.1307 Plugins
Drivers > Misc > FakeSMC v6.8.1307 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal
Drivers > Network > Intel > AppleIntelE1000e v3.0.4.1a
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v3.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > Use KernelCache
Customize > Boot Options > 1080p Display Mode
Customize > System Definitions > Mac Pro > Mac Pro 6,1
Now I have disabled the on board graphics card. I've been using the 760 the whole time during install.
When I look in the Mac OSX info... it says 4600 graphics (null) Even when I'm using the 760
I have installed OSX like 20 times or more... I'm really getting tired.
Is there an easy fix for this or am I pooched?
As of right now... I'm only getting the Apple logo at start up and it freezes. Even with the codes... nada
On to install #21