Contribute
Register

i7 2600 + 980 ti ? = boot loop

Status
Not open for further replies.
Joined
Feb 9, 2016
Messages
7
Motherboard
ASRock B75 PRO3
CPU
i7-2600
Graphics
GTX 980 Ti
I wanted to make a hackintosh one more time, but this time I got a problem. I made bootable usb drive with no problems, but to get to the installation is a problem. I tried with cpus=1, disabling Nvidia driver and it always shows the apple logo, the white line goes a little and then the computer just restarts. Fun fact is that I got few times into a welcome screen for installation (even tho it was pain in the ass because I wrote several times InjectNvidia=false nv_disable=1 nvda_drv=1), but I got few more things to do on Windows so I can continue. Please help me.
 
nv_disable=1 and -v ..try with just those two flags
 
Nope, didn't work..But it bothers me so much that I was able to boot few times and now I'm not.
 
Nope, didn't work..But it bothers me so much that I was able to boot few times and now I'm not.

That's not helpful feedback :)

Why didn't it work - what was the last message you saw before it rebooted?

(That's what the -v flag is for, verbose mode.)
 
I can go again and see the last message, but the message that stopped the process at one point was P-State Stepper Error 18 at step 2 in context 2 on CPU 0.
 
I can go again and see the last message, but the message that stopped the process at one point was P-State Stepper Error 18 at step 2 in context 2 on CPU 0.

Disable EIST in BIOS.
 
Disable EIST in BIOS.

I can't find it anywhere in my BIOS (UEFI).

Btw, here's a picture of last messages:

IMG_2058.jpg
 
Disabling EIST in BIOS and using nv_disable=1 worked, but how do I now boot using my graphics card? I tried booting without nv_disable=1, but my computer restarted.
 
Status
Not open for further replies.
Back
Top