DSDT for Z77 extreme 6

Hello !

I'm currently trying to install my first Hackintosh, but I can't get to boot.

I need to boot in safe mode or OSX won't boot.

Can someone please give a look at my DSDT ?

Here is my computer specs :
Asrock Z77 Extreme 6 with patched and configured Bios
i7 3770k
16gb Ram
320gb HDD
Nvidia GTX660ti ( I can't boot even using the HD4000)
Intel HD4000
RealTek ALC899
Broadcom BCM57781

I can't find any DSDT on the Internet so I extracted mine but I think it need to be edited...

Here it is : http://www.mediafire.com/?c97sgpub1az2bza

And here is my modified bios if needed : http://www.mediafire.com/?5i02gahga7vpaec

I Need the DSDT,too.

I have almost the same set up and Im having alot of issues, the multibeast intall fails everytime

Flash the BIOS with pre-patched BIOS rom's > http://biosrepo.wordpress.com/asrock/

More info about modded BIOS rom > http://www.tonymacx86.com/dsdt/47397-msi-asrock-foxconn-1155-patched-bios-thread.html

Using DSDT Editor tool extract a DSDT and save it as .dsl format (4th option under file tab) compress it and attach.

I can't use DSDT editor, it use java and OSX10.8 don't have java preinstalled, tried to install it, but nothing works...
I can't use java in the terminal as I don't have internet connection for my hackintosh...
Is there any way for me to launch DSDT editor or to install java se 6 on my hackintosh ?

(Sorry about my English, I'm Spanish)

Hi friend,

I have a computer with similar hardware and I get boot:

-Asrock Z77 Extreme 6
-i7 3770k
-Official Bios
-SSD 120GB
-NVIDIA GTX 560ti

The process that I have do is:
1- Unibeast + Mac OS X Mountain Lion (Official) + USB 8GB
2- Install. (To install I must use -x for secure boot, in other case the screen doesn't show)
3- Boot with USB of installation in Mac OS X. (Sometimes it doesn't show nothing and the screen is black, but finally I can boot. I don't use -x for secure boot)
4- In multibeast install easybeast and support for intel grhapics and open cl for Nvidia.
5- Reboot and all works except sound and ethernet, so I install the correct kext for Broadcom BCM57781.

I hope I can help you with my experience.

Now I want to do an DSDT and enable sound of motherboard and HDMI. I'm using my keyboard Logitech G13 for get sound with the audio jack output.

EDIT. The boot is a bit slow and I want to improve this. Also if I install the 10.8.3 version I can't boot, so I use 10.8.2 version of ML

Flash the BIOS with pre-patched BIOS rom's first this is very important > http://biosrepo.wordpress.com/asrock/z77/

More info about modded BIOS rom > http://www.tonymacx86.com/dsdt/47397-msi-asrock-foxconn-1155-patched-bios-thread.html

Using DSDT Editor tool extract a DSDT and save it as .dsl format (4th option under file tab) compress it and attach i will edit the DSDT and get back to you with multibeast settings.

MiniITX said:

Flash the BIOS with pre-patched BIOS rom's > http://biosrepo.wordpress.com/asrock/

More info about modded BIOS rom > http://www.tonymacx86.com/dsdt/47397-msi-asrock-foxconn-1155-patched-bios-thread.html

Using DSDT Editor tool extract a DSDT and save it as .dsl format (4th option under file tab) compress it and attach.

Click to expand...

Hi My System
Asrock Z77 Extreme 6
İntel 2600K
GTX 660 Ti
120 Gb SSD

1- Bios Flashed
2- My system DSDT
http://www.mediafire.com/?xfs70kde20dnfev

Please Fixed My DSDT

Thank You..

1, Set the BIOS as per below.

Advance > Advanced\North Bridge Configuration
Primary Graphics Adapter > GPU* (If you want to use HD3000 - Onboard)
Share Memory > 64MB*
Render Standby > Disabled*

Advanced\South Bridge configuration
Deep Sleep > Enabled in S5*

Advanced Storage Configuration
SATA Mode > AHCI*
Hard disk SMART > Enabled*

ADvanced\Super IO config > Serial Port - Disable

Advanced ACPI config
Suspend to RAM > Disabled*
ACPI HPET Table > Enabled*
RTC Alarm power on > by OS*
reset of the option here is disabled.

Not so imp settings but runs the system quite. Once you boot in fans are controlled by OSX.
HW Monitor
CPU FAN > Level 2
Chassis fan settings > Level 4

2, Fresh mountain Lion installation > http://www.tonymacx86.com/downloads.php?do=file&id=155

3, Download both DSDT and Broadcom 57781 unzip and keep on the desktop.

4, Download the tool Kext beast and run it. This will install the "Broadcom 57781.kext" > http://www.tonymacx86.com/downloads.php?do=file&id=32

5, Download Multibeast for Mountain Lion and run it with the below settings and reboot > http://www.tonymacx86.com/downloads.php?do=file&id=155





Update to 10.8.3 for smooth Graphics performance.
If you do the above steps correctly you should have a perfectly working hackintosh.

Ethernet kext credits > Mieze

-

Hello,

Bro kindly help me also..

My system specs are:

Mobo: Asrock Z77 Extreme6
Cpu: Core i5 2500k
Gpu: Nvidia 560ti
Ram: G.Skill RipjawsX 1600mhz 4gb
Lan Card: Intel Gigabit CT adapter
Sound Card: Creative X-Fi Elite Pro

I also need DSDT.aml

I have not flashed bios.. Im currently using bios version 2.60.. and the one u have mentioned below is version 2.40 will it work if i install the previous version/downgrade..?