Contribute
Register

Asrock z68 pro3 gen3

Status
Not open for further replies.
lovetrinity

lovetrinity

Joined
Oct 8, 2012
Messages
4
Motherboard
Asrock
CPU
2500k
Graphics
5850
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hi there.
Is there any DSDT for my motherboard?
I got an Asrock Z68 pro3 gen3 with 2.30 bios.
Or where i can find a modified bios to install mountain lion.
Ty for ur answers.
 
AsRock boards do not support powermanagement OOB so get the BIOS patched from here

http://www.tonymacx86.com/dsdt/47397-msi-asrock-foxconn-1155-patched-bios-thread.html

If you have installed OSX already on the build then using the tool called Darwindumper extract the BIOS request and get it patched.

If you are on windows then fallow this command to extract BIOS.

http://www.tonymacx86.com/dsdt/47397-msi-asrock-foxconn-1155-patched-bios-thread-47.html#post460286


Extract a DSDT using DSDT Editor in OSX or In windows using AIAD64.

http://www.tonymacx86.com/dsdt/31716-guide-creating-your-own-dsdt-most-boards.html


Let me know if you need help with DSDT.
 
Using DSDT editor extract the DSDT and save it as .dsl file compress it and attach it.
 
sorry for delay
file attached
thanks
 

Attachments

  • DSDT z68 Pro3 Gen3.dsl.zip
    25.7 KB · Views: 231
Suggest you try it on a fresh installation.

Let me know if you need help with Multibeast and BIOS settings.

-
 

Attachments

  • DSDT Z68 PRO3 GEN3_BIOS 2.30_DSDT.zip
    14.4 KB · Views: 293
Can i also youse thisone (i upgraded to 2.3 BIOS) or it has to be custom made for each mobo/cpu/vga combination?
 
Drevan, you can use it as long as you are on the same bios version. Multibeast settings and bios settings are very imp. Try it and let me know if it doesn't work.
 
MiniITX said:
Suggest you try it on a fresh installation.

Let me know if you need help with Multibeast and BIOS settings.

-
Click to expand...

OK thanks
you've been very kind
 
MiniITX said:
Suggest you try it on a fresh installation.

Let me know if you need help with Multibeast and BIOS settings.

-
Click to expand...

Yes I need your help to multibeast settings
I did a clean install, I set AHCI in the bios and all went well.
but when I set multibeast with the various options for my mobo the system crashed.
what options I set on multibeast?

another thing, I usually use the cpu to 4300MHz, how do I use it also on the mac?

thanks for the support
 
Runs great (haven't tested the sleep yet but i have it off anyways). Thank you so much, looked like every one else ignored that MB for DSDT :)
Next step is to figure out how to make the HDMI audio to work, but every time i try the guide I'm like :beachball:
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top