request for a dsdt edit

i'm using 2 graphics cards and a sound card, and all 3 are added in hex to device properties parameter in the chameleon boot plist.

now i need to add my mobo's dsdt for proper sleep, but when i do that i get stuck at the grey apple logo at the boot. so i think the dsdt needs to be edited to work with the extra graphics card and the sound card. even though i read the guides, i couldn't figure out how to do it.

so i would really appreciate if someone can do it for me. i'm attaching the dsdt and the chameleon boot plist.

thanks in advance if ever someone helps me.

anyone? i really need this

can you post also your IOREG and the Mobo specs

is this your clean dsdt ?
first setup your bios and then make dsdt dump in linux,windows or osx. upload it here.
also save/dump ioreg info.
then i'll try to fix it.

another thing. what kexts are you using ? in /extra

That DSDT i attached is just the one from the DSDT database in this site.

I wasn't sure about how to dump my own DSDT and IOREG, but I think I managed to get them They're attached.

There's not a single kext in my /extra folder. only the plist, smbios and some theme images.

Here I paste the my mobo's info from the product's official site.


CPU
Intel® Socket 1156 Core™ i7 Processor/Core™ i5 Processor
Supports Intel® Turbo Boost Technology
Chipset
Intel® P55 Express Chipset
Memory
4 x DIMM, Max. 16 GB, DDR3 2200(O.C.)*/1600/1333/1066 Non-ECC,Un-buffered Memory
Dual Channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
*Hyper DIMM support is subject to the physical characteristics of individual CPUs. Some hyper DIMMs only support one DIMM per channel. Please refer to Memory QVL for details.
**Refer to http://www.asus.com or this user manual for the Memory QVL(Qualified Vendors Lists).
Expansion Slots
1 x PCIe 2.0 x16 (single at x16)
1 x PCI Express 2.0 x16 slots (@x4 mode, 2.5GT/s)
2 x PCI Express 2.0 x1 (2.5GT/s)
3 x PCI
Multi-GPU Support
Supports ATI® Quad-GPU CrossFireX™ Technology
Storage
Intel® P55 Express Chipset built-in
6 xSATA 3.0 Gb/s ports
Intel Matrix Storage Technology Support RAID 0,1,5,10
JMicron® JMB363 PATA and SATA controller
1 xUltraDMA 133/100/66 for up to 2 PATA devices
1 xExternal SATA 3Gb/s port (SATA on-the-go)
1 xSATA 3Gb/s port (black)
LAN
Realtek® 8112L Gigabit LAN controller featuring AI NET2
Audio
VIA® VT1828S 8-Channel High Definition Audio CODEC
- Absolute Pitch BD192/24
- DTS Surround Sensation UltraPC
- BD audio layer Content Protection
- Supports Jack-Detection, Multi-streaming, Front Panel Jack-Retasking
- Optical S/PDIF out ports at back I/O
IEEE 1394
VIA® 6308P controller supports 2 x 1394a ports (one at mid-board; one at back panel)
USB
14 USB 2.0/1.1 ports (6 ports at mid-board, 8 ports at back panel)
ASUS Unique Features
ASUS Hybrid Processor - TurboV EVO
- Auto Tuning, TurboV and Turbo Key
ASUS 16 Hybrid Phase*
- T.Probe Technology for Active Cooling
- 12+2 Phase Power Design
- 100% Ultra Long Life Japan-Made Solid Capacitors
*16 Hybrid Phase = 12+2 Phase x T.Probe
ASUS Hybrid OS - Express Gate
ASUS Xtreme Design
ASUS Exclusive Features
- MemOK!
- ASUS EPU
ASUS Quiet Thermal Solution
- ASUS Fanless Design: Stylish Heat-sink solution
- ASUS Fanless Design: Stack Cool 3
- ASUS Fan Xpert
ASUS Crystal Sound
- ASUS Noise Filter
ASUS EZ DIY
- ASUS Q-Shield
- ASUS Q-Connector
- ASUS O.C. Profile
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 2
- ASUS MyLogo 2
- Multi-language BIOS
ASUS Q-Design
- ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)
- ASUS Q-Slot
- ASUS Q-DIMM
Overclocking Features
Precision Tweaker 2
- vCore: Adjustable CPU voltage at 0.00625V increment
- vIMC: 97-step IMC voltage control
- vDRAM Bus: 81-step DRAM voltage control
- vPCH: 2-step chipset voltage control
- vCPU_PLL: 4-step reference voltage control
SFS (Stepless Frequency Selection)
- PCI Express frequency tuning from 100MHz up to 200MHz at 1MHz increment
- Internal Base Clock tuning from 80MHz up to 500MHz at 1MHz increment
Overclocking Protection
- ASUS C.P.R.(CPU Parameter Recall)
Back Panel I/O Ports
1 x PS/2 Keyboard (Purple)
1 x PS/2 mouse port (Green)
1 x Optical S/PDIF Output
1 x External SATA
1 x IEEE1394a
1 x RJ45 port
8 x USB 2.0/1.1
8-channel Audio I/O
Internal I/O Connectors
3 x USB connectors support additional 6 USB ports
1 x IDE connector
7 x SATA connectors
1 x IEEE 1394a connector
1 x CPU Fan connector
1 x Power Fan connector
2 x Chassis Fan connector (1x4-pin, 1x3-pin)
Front panel audio connector
1 x S/PDIF Out Header
CD audio in
24-pin ATX Power connector
1 x 8-pin ATX 12V Power connector
System Panel(Q-Connector)
1 x MemOK! button
1 x COM port connector
BIOS
16 Mb Flash ROM , AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree BIOS 3
Manageability
WfM 2.0,DMI 2.0,WOL by PME,WOR by PME,PXE

Thanks!

Hey,

Have you tried following this thread: viewtopic.php?t=35559 ?

I used ubuntu to dump my dsdt.aml file, and applied the patches as indicated in this thread. Works like a charm. My GA-G41MT-D3V is not in the database either.

Fairly easy to do, IMHO.

yes, it would be best if you do it yourself. but little help

ok fixed classical warnings.

_T_0 renamed to T_0
_T_1 renamed to T_1
_T_2 renamed to T_2
_T_3 renamed to T_3
(MUTE, 0x03E8) renamed to (MUTE, 0xFFFF)
(MUTE, 0x0FFF) renamed to (MUTE, 0xFFFF)
ECRB,ECWB,ECBR added Return (Zero)

remove irq's from PIC RTC0 TMR
add irq to hpet:
IRQNoFlags ()
{0}
IRQNoFlags ()
{8}
added device sbus

you could also follow macmanx86's guide to add usb device id's

you can experiment from here.
sorry for delay, job

by

duffs said:

yes, it would be best if you do it yourself. but little help

ok fixed classical warnings.

_T_0 renamed to T_0
_T_1 renamed to T_1
_T_2 renamed to T_2
_T_3 renamed to T_3
(MUTE, 0x03E8) renamed to (MUTE, 0xFFFF)
(MUTE, 0x0FFF) renamed to (MUTE, 0xFFFF)
ECRB,ECWB,ECBR added Return (Zero)

remove irq's from PIC RTC0 TMR
add irq to hpet:
IRQNoFlags ()
{0}
IRQNoFlags ()
{8}
added device sbus

you could also follow macmanx86's guide to add usb device id's

you can experiment from here.
sorry for delay, job

by

Click to expand...

doesn't work at all, i get stuck on the gray apple logo when starting, not even the loading icon.

(sorry for the late answer)