Overclocking and DSDT

Advanced Frequency Settings:

CPU Clock Ratio 21x

Advanced Core Features  [Press Enter]:

Intel(R) Turbo Boost Tech................[Auto]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Auto]
CPU Enhanced Halt (C1E)..................[Auto]
C3/C6/C7 State Support...................[Auto]
CPU Thermal Monitor......................[Auto]
CPU EIST Function........................[Auto]
Bi-Directional PROCHOT...................[Auto]

QPI Clock Ratio..........................[Auto]
QPI Link Speed........................[4.8Ghz]
Uncore Clock Ratio....................[16x]
Uncore Frequency.........................2133MHz

>>>>>   Standard Clock Control <<<<<

Base Clock (BCLK) Control................[Disabled]
BCLK Frequency ..........................[133]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[Auto]
Memory Frequency (MHz)................1333
PCI Express Frequency (MHz)..............[Auto]
C.I.A.2..................................[Disabled]

>>>>>   Advanced Clock Control   <<<<<

CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[    0ps]

Advanced Memory Settings:

Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[Auto]
Memory Frequency (MHz)................1333
Performance Enhance   (SPD)............. [Turbo]
DRAM Timing Selectable (SPD)............ [Expert]
Profile DDR Voltage ..................1.5
Profile QPI Voltage ..................1.1
Channel Interleaving.....................[Auto]
Rank Interleaving........................[Auto]

>>>>>   Channel A & B

Channel A Timing Settings            [Press Enter]:
Cas Latency Time........................[7]
tRCD....................................[7]
tRP.....................................[7]
tRAS...................................[21]

>>>>>   Advanced Timing Control

tRC....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. 1 [1]

>>>>>   Misc Timing Control

B2B Cas Delay..........................[Auto]
Round Trip Latency.....................[Auto]

Channel A Turnaround Settings [Press Enter]:
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]

>>>>>   Channel A Writes Followed By Writes

Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]


Advanced Voltage Settings:

******Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------

>>> CPU
Load Line Calibration...................[Auto]
CPU Vcore..................1.175v..[Auto]
QPI/VTT Voltage..........1.100v.....[Auto]

>>> MCH/ICH
PCH Core....................1.050v.....[Auto]
CPU PLL......................1.800v.....[Auto]

>>> DRAM
DRAM Voltage..............1.500v.....[Auto]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]


Miscellaneous Settings:[/SIZE]

Isochronous Support....................[Enabled]
Virtualisation technology..............[Enabled]
USB Storage Detect ....................[Disabled] Located In Integrated Peripherals Page