Contribute
Register

New DSDT GA P55A-UD3R Bios F6, please try

Status
Not open for further replies.
Joined
Jan 16, 2010
Messages
12
Motherboard
GA-X77-D3H
CPU
Core i5 3570K
Graphics
Radeon HD6950 (Bios HD6970)
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. Android
  2. iOS
I tried to edit the DSDT for my motherboard GA P55A-UD3R with the lastest bios (seems to work better with the ALC889)
but i have 1 error with the compilation. And i don't find where i make this error Oo
Compiling error is just after editing the PIC, TMR and HPET. (i don't see any bracket error)

Have you any idea ?

Thank you in advance.



Corrections mades: Error is just after make: Edit PIC, TMR and HPET

Add DTGP
Fix CMOS reset
Edit USB UHCI/EHCI - Part 1
Edit USB UHCI/EHCI - Part 2
Edit IDE (SATA)
Edit PIC, TMR and HPET
Add SBUS
Enable HDEF Audio - ALC 889

Intel ACPI Component Architecture
ASL Optimizing Compiler version 20091214 [Dec 16 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 4.0

/Users/francois/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl 3667: Device (RTC)
Error 4096 - syntax error, unexpected PARSEOP_DEVICE ^

ASL Input: /Users/francois/Library/Application Support/EvOSoftware/DSDT/DSDTFiles/dsdt.dsl - 5793 lines, 211573 bytes, 2380 keywords
Compilation complete. 1 Errors, 0 Warnings, 0 Remarks, 769 Optimizations



Edit: I found the error, now i have 0 errors.

If someone could test ?


dsdt-F6-MOD.aml
dsdt-F6-MOD.dsl

dsdt-unmodded.dsl
 

Attachments

  • dsdt-F6-MOD.dsl
    206.6 KB · Views: 202
  • dsdt-unmodded.dsl
    198.7 KB · Views: 167
  • dsdt-F6-MOD.aml
    19.4 KB · Views: 220
I just edited a new version of this DSDT- special thanks to Hector for the original one. Thank you for your efforts too Acetone. Hope this one works- it's the F6 bios.

Public/DSDT-GA-P55A-UD3R-F6.aml
 
Great, you'r wonderfull !!!

I test
 
My graphic card is dead :( (HD4890 OC) and for the 6 nexts weeks i have an unsuported graphic card (HD3850).

So i have some problems to test the DSDT. I'll try this week to have an display working.
 
Too many latenight LAN parties... :lol:

Seriously though, that sucks- might just pick up a cheapo 8xxx or 9xxx series Nvidia though- no worries on setup, etc...

Also, specs in signature!! :twisted:
 
I just upgraded my bios from F6 to F7 (it's a new bios)
I decided to make my own DSDT so I've read the guides... and compared the DSDT-F6 attached in this thread with the example DSDT(tony's DSDT-FIXES).
I found that in DSDT-F6, the patches for PIC & TMR seem not to be applied.
Would it be OK?

And one more thing...

00 - Add DTGP (Need for all Fixes)
01 - Fix CMOS reset
02 - Edit USB UHCI/EHCI - Part 1 (Enables Sleep & USB Ports Built In)
03 - Edit USB UHCI/EHCI - Part 2 (Enables Sleep & USB Ports Built In)
04 - Edit IDE (SATA) (Enables SATA ports Built-In and Internal)
05 - Edit PIC, TMR and HPET (Enables you to get rid of extra kexts)
06 - Add SBUS (Need for Sleep)

I want to apply these patches on my own DSDT...
then, just copy & paste from the example file? or need to be modified?
I know some codes, like speedstep patch, need to be modified. But I think those codes above don't need to be.
 
Aden said:
I just upgraded my bios from F6 to F7 (it's a new bios)
I decided to make my own DSDT so I've read the guides... and compared the DSDT-F6 attached in this thread with the example DSDT(tony's DSDT-FIXES).
I found that in DSDT-F6, the patches for PIC & TMR seem not to be applied.
Would it be OK?

And one more thing...

00 - Add DTGP (Need for all Fixes)
01 - Fix CMOS reset
02 - Edit USB UHCI/EHCI - Part 1 (Enables Sleep & USB Ports Built In)
03 - Edit USB UHCI/EHCI - Part 2 (Enables Sleep & USB Ports Built In)
04 - Edit IDE (SATA) (Enables SATA ports Built-In and Internal)
05 - Edit PIC, TMR and HPET (Enables you to get rid of extra kexts)
06 - Add SBUS (Need for Sleep)

I want to apply these patches on my own DSDT...
then, just copy & paste from the example file? or need to be modified?
I know some codes, like speedstep patch, need to be modified. But I think those codes above don't need to be.

Should be pretty similar if not exactly similar to the UD2 versions that are in that guide. Also, make sure you have a look at IORegistryExplorer and compare what it dumps for you to the changes as much as you can. Good luck- glad you're taking the initiative to make the changes yourself! I'll check your work.
 
Status
Not open for further replies.
Back
Top