Contribute
Register

UniBeast 2.1 Update

Status
Not open for further replies.

MacMan

Administrator
Staff member
Joined
Feb 2, 2010
Messages
8,175
Motherboard
ASUS TUF Z390-PRO GAMING - 2606 - UEFI
CPU
i9-9900K
Graphics
Vega 64
Mac
  1. MacBook Pro
  2. Mac Pro
Classic Mac
  1. Power Mac
  2. PowerBook
Mobile Phone
  1. iOS
ub2.0.png
UniBeast has been updated to version 2.1. Incorporating changes required for OS X 10.8.5, the tool is now fully compatible with Haswell based systems. UniBeast 2.1 is now available for download at tonymacx86.com/downloads.

Changes:
  • Bootloader updated to Chimera v2.2.0-r2148
  • AHCI_3rdParty_SATA driver by MacMan updated to v0.4
  • Intel Ethernet driver (AppleIntelE1000e) by hnak updated to v2.5.4c
  • USB 3.0 driver GenericUSBXHCI by zenith432 updated to v1.2.5
Please do not upload or redistribute UniBeast to any other sites.

If this utility has helped you, please consider a contribution to support further UniBeast development. Thanks in advance, and enjoy!

Related Posts:
Installation Guide - OS X 10.8 - UniBeast for Mountain Lion
Installation Guide - OS X 10.7 - UniBeast for Lion
UniBeast Troubleshooting Notes
UniBeast.com
 
Last edited by a moderator:
Great will test this out. Need to do a clean reinstall to see if this works will get back once I'm done
 
I was having a lot of issues with 10.8.5 clean install with the last one, I hope this works. I miss my mac. thanks for all the hard work
 
I have identical rigs, except for the GPU: GA-Z87-D3HP, i5-4670k, then one with XFX Radeon HD 6850 and another with Gigabyte Radeon HD 7950.

The first (6850) worked fine with UniBeast 2.0.2 + Chimera 2.2.0, but the second (7950) is giving me boot0: GPT, boot0: test, boot0: test, gibberish, just a load of symbols.

I'll try this new UniBeast and post results as soon as I'm done.

Thanks! =)

--== Edit 1 ==--
boot0: GPT, boot0: test, boot0: test, gibberish, just a load of symbols.

Problem found. Can't use 7950 as primary, changed to IGFX in bios and now setup is on the way.

Also, while UniBeast 2.0.2 gave me issues with the USB 3.0 kext in Extra, this one (UniBeast 2.1.0) ran perfectly without any additional options to the setup window.

--== Edit 2 ==--
FLAWLESS INSTALLATION!!!!

Now just looking forward to the updated MultiBeast!

Yay! =)

P.S.: One winblows installation was destroyed during this fantastic hackintosh installation. =)
 
I´m a noob into the customac world. Recently, I built a computer with a intel´s i5 haswell processor and mountain Lion as Main OS, using the "Temporary Installation Guide" and UNIBEAST 2.0. Although it was a success, I decided to use windows 7 for poor graphics performance (I do not have a dedicated GPU, I use the intel hd 4600 graphics). Then my question is: Whit UNIBEAST 2.1 "powered" by Chimera 2.2, Can my customac work with the intel HD 4600 Graphics in 1080p resolution? Of course, i have a FHD monitor.
 
Does this means we can install osx from usb 3.0?

- - - Updated - - -

Does this means we can install from usb 3.0
 
Article: UniBeast 2.1 Update

Works well!! Just finished a clean install on Haswell System.

GA-Z87X-UD3H
32GB Kingston 1600Mhz DDR3
GTX780

Only thing that still not working is the audio, although I installed the driver and the device is recognized, there is still no sound. If anyone can help, will be greatly appreciated. Thanks
 
Crashes at apple screen, ran -v and it goes completely through no errors but then crashes/reboots immediately. I'll hold tight for now. Haswell 4770k MSI GD65
 
Status
Not open for further replies.
Back
Top