• post installation

    March 14th, 2014 08:34 AM
    Requirements: 1. PM Unlocked BIOS (you do NOT have MSR register 0xE2 bit 15 set) (The old MSR E2 patch for AppleIntelCPUPowerManagement.kext will NOT work). With PikerAlpha’s AICPUPMI output, If you see: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x****8*** (*= any number) Then it is locked. You want to see:
    March 9th, 2014 12:14 PM
    There are certain random issues with audio in Chrome/Flash since 10.8.4- one solution I've found is to use the older patched AppleHDAs from MultiBeast 5.4.3. The AppleHDA version is 2.3.7. Current AppleHDA is 2.6.0. Here's a list of versions of AppleHDA since 10.7: Hope this helps. Older MultiBeast revisions can be found in the...
    March 13th, 2014 07:03 PM
    Found a free tool for testing network LAN speed. You can use this to test read/write between your Ethernet and WIFI card if you have one. It's free. http://www.totusoft.com/downloads.html
    March 8th, 2014 07:48 AM
    Well, i installed yesterday the 10.9.2 update. I installed again the ALC 892 DSTD-free from multibeast but now, everytime when my computer sleeps, the audio isn't working when waking up. My motherboard is Z87X-D3H. Thanks!
    March 8th, 2014 08:27 AM
    I've just installed Mavericks OS X 10.9.1 (13B42) on: x79-up4 motherboard 3930k Processor XFX 280x OC Black Edition 32GB Ram I have it booting from an old Nvidia 8400GS. The problem is, Mavericks does not recognise the 280x GPU? It shows up as:
    March 27th, 2014 05:52 PM
    Problem: If you have a Thunderbolt 2.0 motherboard, such as the Gigabyte Z87X-UD7-TH, there is a boot time delay of 45 seconds or so when Thunderbolt peripherals are attached. Solution: For Chimera/Chameleon, delete /System/Library/Extensions/AppleThunderboltNHI.kext, rebuild cache and reboot. 1. Open Terminal 2. Type the following and...
    March 18th, 2014 07:19 AM
    My computer won't boot up anymore. I get an error message and it gets stuck at the grey apple boot up screen. Don't know how to fix it so I would like to know how to re-format my drive and start over. (I know it's a dumb question, but I just don't know how to reformat from outside of OSX)
    Page 1 of 3123