• the workshop

     | 
    September 30th, 2014 06:09 AM
    Anybody know how i can overclock my system and if it is a good idea? Could it mess up my computer regarding booting and what not? I have watercooling and a i7 4790 K. The motherboard I use is a Gigabyte GA-Z97X-UD7 TH motherboard and a EVGA GeForce GTX 760 graphic card. I have never overclocked a computer before, can anybody help me trough...
    3
     | 
    October 18th, 2014 04:51 AM
    Hi, I would like to know what frequency type I should be using for Yosemite for my i2500k (4 core) Mavericks I had going 43 43 43 42 In Yosemite 42 42 42 41 seems to work. I tried auto and 43 43 43 42 but my computer was a slug. I did try all 42's but didn't seem to work very well?! (Slower speeds) I also have 1600mhz 16Gb Corsair...
    4
     | 
    September 22nd, 2014 06:23 PM
    In CPUZ does DRAM frequency show half speed? CPU core speed: 3899.09MHz Memory DRAM Frequency 1199.8MHz If I am interpreting correctly, my CPU is running at 3.9GHz, and RAM at 2400MHz?
    4
     | 
    September 18th, 2014 12:37 AM
    I got 4 sticks of G Skill F3-19200C10-8GBZHD for a total size of 32GB. Rated speed is 2400Mhz. The system will boot into BIOS at 2400Mhz, but OSX hangs during booting at any speed > 1400. The system will also hang if XMP profile 1 or profile 2 are selected. Board is a GA-Z87-HD3. CPU is 4790K, not currently overclocked. The system will...
    2
     | 
    October 20th, 2014 04:17 AM
    So in Mavericks and back you could just change your Icon in `/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources`, but now In Yosemite, where it just shows the 'X' Icons, how do you change that?
    0
     | 
    October 18th, 2014 08:19 PM
    i just installed yosemite on my ga-z87mx-d3h and 4770K and yosemite is really not liking overclocking. i had a solid 4.3 overclock in mavericks but im trying stuff and either it crashes after a bit of OS loading or it decides to be slow... anybody knows what to do?
    2
     | 
    September 25th, 2014 08:37 PM
    Hello everyone, I have to install 4x4tb HDD and 1x250Gb SSD on a system. How do i have to do that?? I am going to do the following: 1. Install Mac OS on the SSD with the Hard Drives off. 2. Install the HDD and configure them by software on the disk utility. raid 10 here.
    0
    Page 1 of 3123